Tuff Temp Corp. - Kevlar Endless Belts


	TUFF TEMP CORPORATION


	*– HEAT RESISTANT TEXTILES & BELTING –*


	3788 Sterner Mill Road Quakertown, PA 18951 USA


	Phone: 215-322-9670 / 215-261-7067 Fax: 215-261-7065 / 215-322-3905 info@tufftemp.com

ENDLESS TRANSFER BELTS


	TUFF TEMP Corp. manufactures a unique Endless Transfer Belt that combines both superior heat and abrasion with outstanding mechanical performance


	TUFF TEMP can provide unmatched levels of durability and wear life for your handling systems. However, for Endless Transfer Belts, mechanical performance issues, such as minimal belt stretch and proper belt tracking are equally important and TUFF TEMP exerts 25+ years of engineering expertise to ensure a high standard on these measures.


	All TUFF TEMP Transfer Belts are joined endless using a unique splice that contains only 100% Kevlar non-marking textile materials and functions as a virtually seamless joint. The strength, integrity and dimensional stability of this join is excellent Belts can be driven on pulleys as small as 3" (75 mm) in diameter and belt stretch has consistently proven to be minimal.

Any potential belt stretch is also further controlled through our use of pre-stretched belts. Prior to installing the endless splice, all transfer belts are either Wear Gard treated or Water Stretched treated in one of our in house curing ranges. Both treatments subject the belting to a high degree of tension during operation, effectively pre-stretching it before it runs on your system. Once pre-stretched, the belting is carefully measured to your defined length specification, and our unique splice is then installed.


					All TUFF TEMP Endless Transfer Belts are fabricated and thoroughly inspected to exacting standards for consistency in both width and straightness throughout the length of the belting, including the spliced area. With a high degree of dimensional stability and consistency in both width and lack of curvature, TUFF TEMP ensures good tracking on your conveyors, with minimal belt travel.


	TUFF TEMP Endless Transfer Belts are custom fabricated to your specific width and length (up to a 24" or 610 mm maximum width, and no defined limitation on length). Belt thickness can vary from a nominal 1/4" (6 mm) to a nominal 3/8" (9 mm), dependent upon which TUFF TEMP belt pattern and treatment is selected.


	It is our pleasure to supply you with No Charge product samples for head to head comparison testing. This is the best way for us to prove our value to you, and we welcome the opportunity to do so!


	Proud Member of the Aluminum Extruders Council


	Copyright © 2010 Tuff Temp Corp Division of TexTemp LLC. All Rights Reserved.